|
|
The water flow simulation in the cesspit
Šrámková, Dagmar ; Hyánková, Eva (referee) ; Kriška-Dunajský, Michal (advisor)
This diploma thesis consists of two parts, part research and part attachments. The first section describes the literary problems of today's way of cleaning wastewater from small producers and characteristics of wastewater. The work is focused on the aspect of nature and all of these methods are directed towards this direction. The literary section is devoted to anaerobic environment, which is just one of the natural ways of treatment of waste water, in our case in a septic tank. The second part of the thesis deals with modeling of flow and behavior of sludge and water mixture in the cesspit septic tank sludge with variable densities and flow speeds. Modeling and calculations are made using COMSOL Multhiphysics. The conclusion is then summarized findings from the flow cesspit septic tank with the results and the assessment of whether a septic tank still has its place among the modern methods of wastewater treatment.
|
|
|
Sludge Pumping on WWTP
Fadrný, Tomáš ; Medek, Jaroslav (referee) ; Boráň, Jaroslav (advisor)
This diploma thesis deals with the best solution design for a sludge fitting, especially focusing on the right choice of pumps for the waste water treatment plant in Prostějov. The pumps were selected for a circulation pipeline, which heats up the sludge. Several measurements were carried out in order to determine the statistical evaluation of the properties of the pumped medium. The figures gained were used to calculate pressure losses.The diploma thesis is divided into two parts. The first part provides a theoretical analysis of the problem and the second part presents the results and subsequently the reasoning for the new selection of pumps in order to change the WWTP technology from the mesophilic to the thermophilic sludge digestion. The test records describing the testing of the individual samples of the pumped sludge are attached.
|
|
|
Determination of PLA microplastics in soil by using pyrolysis methods
Románeková, Ivana ; Mravcová, Ludmila (referee) ; Kučerík, Jiří (advisor)
Nowadays, plastic waste poses one of the greatest risks to the environment. Plastics affect the environment at all stages of their life cycle. Bioplastics have become widely used as a substitute for conventional plastics, without detailed examination of their behavior in real environmental conditions. As a result, it is assumed that they can accumulate in the environment and the question arose as to how to identify them. The main goal of this thesis is to develop a method based on sample pyrolysis that is suitable for the identification and determination of the amount of PLA microplastics in soil and other solid matrices. Three types of soils and sludge were used for analysis. These matrices were spiked to obtain concentration ranges 0,2% - 5,0%. The pyrolysis resulted in evolution of gases with the signals m/z 29, 43 and 44, witch originated from PLA and are suitable for qualitative and quantitative analysis. Analysis of PLA in sludge was more complicated due to similarity of gases evolved from pure matrices. We tested three approaches based on analysis of signal´s peak areas, intensities and temperatures of gas evolution. While the first approach failed, the last two approaches appeared to be promising for qualitative and quantitative analysis of PLA in the sludge. Several methods suitable for qualitative and quantitative analysis of even very small amounts of PLA in soils and sludge have also been designed/developed. These methods were based on analysis of the composition and dynamics of the released gases and the characterisctic degradation temperatures.
|
|
|
Properties of anaerobic sewage sludge from small producers
Pospíšil, Jaroslav ; Kriška-Dunajský, Michal (referee) ; Hyánková, Eva (advisor)
The bachelor thesis deals with today's wastewater treatment from small producers and characteristics of primary sludge. Work is focused on natural ways of wastewater treatment. The main attention is devoted to the primary sludge. In the next section are based on laboratory tests, where samples are tested properties. There is tested the primary sludge from the mechanical pre-treatment, and namely from the sedimentation tank.
|
|
| |
|
|
Evaluation of operational parameters of sludge pumps.
Kuzmová, Barbora ; Hodáň, Václav (referee) ; Hlavínek, Petr (advisor)
The aim of the bachelor thesis is to determine the parameters of sludge pumps. In the first part of the thesis is processed by a general search of pumps and their basic division. There are described properties of individual pumps. There are mentioned the reasons influencing parameters of the pump. This study is more closely engaged with sludge pumps and their comparison. For review, in the thesis is chart with sludge impellers. In this work are compares channel, vortex, screw and other impellers. This comparison is shown in chart of impellers. There are also described methods of measuring the parameters of the pumps, mentioned test procedures and diagrams of experiments. The practical part is described clogging test. The experiment was conducted on a channel pump. The process and result of the experiment is mentioned in thesis.
|
|
|
Energy balance of urban wastewater treatment plants
Čížová, Barbora ; Bartoník, Adam (referee) ; Hluštík, Petr (advisor)
The research part of the diploma thesis is focused on an issue of energy consumption in sludge treatment at wastewater treatment plants divided by the number of population equivalent. The aim of the practical part is to set indicators and propose evaluative criteria concerning energy performance of urban wastewater treatment plants. The verification of proposed criteria and energetic analysis result from data of the wastewater treatment plant in Novy Jicin.
|
|
|
The waste management of the constructed treatment wetlands
Mrvová, Michaela ; Hyánková, Eva (referee) ; Kriška-Dunajský, Michal (advisor)
The thesis is focused on the sludge management at root sewage treatment plants with focus on volum eis highest – sludge manahement. Sludge dewatering using sludge dryiing bed is still condemned designers mainly due to their lack of experience, while at the same time enforcing technologically complex solutions. Therefore, the thesis focuses on the break down balance hydrological equation sludge drying bed, which includes all parameters affecting water balance system. The result is a proposal not only design, but in particular a description of input data and the governing equations in software Reed-Bed, which is calibrated own operational results obtainde for the two sewage treatment plants (village Dražovice and Kotenčice). Reed-Bed software will perform sevetal functions: setting the ground area of sludge bed, investment costs required for the implementation of sludge bed, return on investment, the determination of moisture contene of sludge in the sludge bed and maximum lenght of the dewatering period with regard to wetland vegetation. The second largest item within sludge system creates biomass wetland plants, so work deals with possibilities biomass processing plant at the end of the growing season. Technological processing of biomass was tested on common reed, final product pellets for heating.
|
|
|
Level scraping systems of settlement tanks
Rusník, Tomáš ; Hort, Filip (referee) ; Brandejs, Jan (advisor)
Main topic of this bachelor thesis is analyse of settlement tanks scraping equipements in sewage plants. Settlement tank at the wastewater treatment plant is part of the so-called bio-lines, which is used for the separation of activated sludge from waste water. Activated sludge settles in the settling zone. Part of the sludge flotates to the surface of the tank, usually in the space between the inflow cylinder and overflow edge, respectively. This sludge, biological or chemical origin, may, at the massive occurrence, outflow to the recipient and causes worse quality of the effluent. The sludge is therefore necessary to remove from surface of the settlement tank. Some of the different systems of sludge collection have been developer during last decades. The equipments and their function are descriped in my work.
|
|
|
Sewage sludge - the present and the future
Žerava, Zdeněk ; Houdková, Lucie (referee) ; Boráň, Jaroslav (advisor)
Possibilities of sewage sludge utilization are synoptically described in this bachelor thesis. Main types of sludge utilization in Czech Republic are mentioned as well. This work is focused especially on factors influencing the choice of methods of sludge disposing and on comparison of sludge disposing in Czech Republic and another EU countries.
|
guest ::
